83. Valve Rocker Arm Cover Installation - Left Side

Valve Rocker Arm Cover Installation - Left Side





1. Install the valve rocker arm cover.
2. Apply GM P/N 12345382 (Canadian P/N 10953489) threadlocker or the equivalent to threads.

Notice: Refer to Fastener Notice .

3. Install the valve rocker arm cover bolts.

Tighten the valve rocker arm cover bolts to 10 N.m (89 lb in).





4. Install the engine mount strut upper bracket bolts (1) if applicable.

Tighten the engine mount strut upper bracket bolts (1) to 50 N.m (37 lb ft).

5. Install the engine mount strut bracket and nuts (2), if applicable.

Tighten the engine mount strut bracket and nuts (2) to 50 N.m (37 lb ft).