Instrument Panel Outer Trim Cover Replacement

Instrument Panel Outer Trim Cover Replacement

Removal Procedure





1. Using the finger opening, pull the right instrument panel (I/P) compartment access hole cover from the I/P trim pad.




2. Pull the I/P trim plate (glove box outboard) rearward in order to release the retainers.
3. Remove the I/P trim plate.



Installation Procedure





1. Position the I/P trim plate retainers to the slots in the I/P trim pad.
2. Install the I/P trim plate by pressing the panel straight into the I/P carrier.




3. Align the right I/P compartment access hole cover to the I/P trim pad. Press the cover to the trim pad.