Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
- Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation
.
- Remove the left engine splash shield. Refer to Engine Splash Shield Replacement
.
- Use floor stands to support the transaxle.
Courtesy of GENERAL MOTORS CORP.
- Using a jack, slightly take the weight off mount, and remove the transaxle bracket to transaxle mount upper nuts.
Courtesy of GENERAL MOTORS CORP.
- Remove the transaxle bracket to transaxle bolts.
- Remove the transaxle bracket.