LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix GXP >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Flywheel to Torque Converter Bolt Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Torque Converter Covers
    GM631009Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the torque converter cover bolts.
  3. Remove the torque converter covers.
    4. Fig 2: Holding Flywheel
    GM309963Courtesy of GENERAL MOTORS CORP.
  4. Install the J 37096  in order to gain access to the torque converter bolts and to prevent the flywheel from turning.
    5. Fig 3: Identifying Flywheel To Torque Converter Bolts
    GM160984Courtesy of GENERAL MOTORS CORP.
  5. Remove the flywheel to torque converter bolts.
scientia non olet · About LEMON Manuals