Installation Procedure
- Install the O-ring (316) and the 2-3 shift solenoid (315B).
- Install the 2-3 shift solenoid retaining clip (314C).
- Connect the 2-3 shift solenoid electrical connector.
- Install the case side cover. Refer to Control Valve Body Cover Replacement .
IMPORTANT:
It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned. Reset the TAP values. Refer to Transmission Adaptive Functions .
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned. Reset the TAP values. Refer to Transmission Adaptive Functions .