Transmission Support Fixture Assemble

Tools Required

• J 3289-20  Holding Fixture Base
• J 28664-B  Transmission Holding Fixture. See Special Tools .
• J 44465  Holding Fixture Adapter. See Special Tools .

Fig 1: J 28664-B & J 3289-20 Installed Onto Transmission
Courtesy of GENERAL MOTORS CORP.
1. Install J 44465  onto J 28664-B  . See Special Tools .
2. Install J 28664-B  onto the transmission. See Special Tools .
3. Install the transmission and holding fixture into J 3289-20  .
4. Insert the pin into J 3289-20  in order to hold the transmission in the desired position.