Transmission Holding Fixture Disassemble

Tools Required

• J 28664-B  Transmission Holding Fixture. See Special Tools .
• J 3289-20  Holding Fixture Base
• J 44465  Holding Fixture Adapter. See Special Tools .

Fig 1: J 28664-B & J 3289-20 Installed Onto Transmission
Courtesy of GENERAL MOTORS CORP.
1. Remove the pin from J 3289-20  .
2. Remove the transmission and J 28664-B  from J 3289-20  . See Special Tools .
3. Remove J 28664-B  from the transmission. See Special Tools .
4. Remove J 44465  from J 28664-B  . See Special Tools .