LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix GXP >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Torque Converter Fluid Seal Removal >> Tools Required

Tools Required

    Fig 1: Cross Sectional View Of J 41103 Components
    GM1239231Courtesy of GENERAL MOTORS CORP.
  1. Insert the three J 41103-1  puller legs under the Torque Converter Seal (525). See Special Tools .
  2. Insert the J 41103-3  support body over the drive sprocket support (522). See Special Tools .
  3. Insert the J 41103-2  puller bridge over the J 41103-3  support body. See Special Tools . Connect the J 41103-1  puller legs into the slots on the J 41103-2  bridge. See Special Tools .
    4. IMPORTANT: The puller legs will damage the torque converter seal (525). Discard the torque converter seal (525) after removal.
  4. Tighten the forcing screw on the J 41103-2  puller bridge until the J 41103-1  puller legs remove the torque converter seal (525). See Special Tools .
scientia non olet · About LEMON Manuals