LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix GXP >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Oil Pump Drive Shaft Assemble

Oil Pump Drive Shaft Assemble

    Fig 1: Inspection Areas On Oil Pump Drive Shaft
    GM49391Courtesy of GENERAL MOTORS CORP.
  1. Inspect the oil pump drive shaft (227) for the following:
    • A scored or rough journal surface
    • Stripped or burred splines
    • A cut or damaged seal
  2. Install a new oil pump drive shaft seal (228) onto the oil pump drive shaft (227).
  3. Fig 2: Installing Oil Pump Drive Shaft Assembly
    GM49394Courtesy of GENERAL MOTORS CORP.
  4. Install the oil pump drive shaft assembly (227) into the case cover (400).