Conditions for Setting the DTC

P0120

• TP sensor 1 voltage is less than 0.376 volt or more than 4.506 volts.
• The PCM learns a minimum throttle position of more than 0.714 volt.
• The TP sensor reference voltage is less than 4.54 volts or more than 5.21 volts.

P0220

• The TP sensor 2 voltage is less than 0.282 volt or more than 4.6 volts.
• The PCM learns a minimum throttle position of more than 0.813 volt.
• The TP sensor reference voltage is less than 0.5 volt.

P2135

• The throttle position indicated by TP sensor 1 disagrees with the throttle position indicated by TP sensor 2 by more than 6 percent.

  OR

• The PCM learned minimum throttle position of TP sensor 1 disagrees with the learned minimum throttle position of TP sensor 2.

  OR

• The PCM detects that the TP sensor 1 signal circuit is shorted to the TP sensor 2 signal circuit.