Conditions for Running the DTC

P0112

• DTC P0116, P0117, P0118, P0128, P0502, or P0503 is not set.
• The engine run time is greater than 10 seconds.
• The vehicle speed sensor (VSS) indicates that vehicle speed is more than 40 km/h (25 mph).
• The engine coolant temperature (ECT) is less than 121°C (250°F).
• The diagnostic runs continuously when the above conditions are met.

P0113

• DTC P0101, P0102, P0103, P0116, P0117, P0118, P0128, P0502, or P0503 is not set.
• The engine run time is greater than 180 seconds.
• The VSS indicates that vehicle speed is less than 24 km/h (15 mph).
• The mass air flow (MAF) is less than 10 g/s.
• The ECT is more than 60°C (140°F).
• The diagnostic runs continuously when the above conditions are met.

P1111

• DTCs P0101, P0102, P0103, P0116, P0117, P0118, P0125-L32 only, P0128, P0502, P0503 are not set.
• The engine run time is more than 180 seconds.
• The ECT sensor parameter is more than 60°C (140°F).
• The vehicle speed is less than 24 km/h (15 mph).
• The MAF is less than 10 g/s.
• The diagnostic runs continuously when the above conditions are met.

P1112

• DTCs P0116, P0117, P0118, P0125-L32 only, P0128, P0502, P0503 are not set.
• The engine run time is more than 10 seconds.
• The ECT sensor parameter is less than 121°C (250°F).
• The VSS indicates that vehicle speed is more than 40 km/h (25 mph).
• The diagnostic runs continuously when the above conditions are met.