LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix GXP >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 3.8L) >> Repair Instructions - On Vehicle >> Fuel Injector Sight Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Clean the area around the tube/oil fill cap before removing the tube/oil fill cap in order to prevent contaminants from falling into the valve rocker arm cover opening.
    2. Fig 1: Oil Fill Cap, Oil Fill Tube & Fuel Injector Sight Shield (L26)
    GM911150Courtesy of GENERAL MOTORS CORP.
  2. Twist counterclockwise to unlock the oil fill tube from the valve rocker arm cover (3).
  3. Lift and remove the fuel injector sight shield (1).
  4. Install the oil fill tube (3) and the oil fill cap (2).
scientia non olet · About LEMON Manuals