LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix GXP >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 3.8L) >> Repair Instructions - On Vehicle >> Fuel Injector Sight Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Oil Fill Cap, Oil Fill Tube & Fuel Injector Sight Shield (L26)
    GM911150Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil fill cap (2) and the oil fill tube (3).
  2. Insert the tab of the fuel injector sight shield under the fuel injector sight shield bracket.
  3. Place the hole of the fuel injector sight shield (1) onto the oil fill neck of the valve rocker arm cover.
  4. Install the oil fill tube (3) and the oil fill cap (2).
scientia non olet · About LEMON Manuals