Engine Support Fixture

Tools Required

• J 28467-B  Universal Engine Support Fixture
• J 36462-A  Engine Support Adapter Leg Set. See Special Tools .
• J-28467-501  Engine Support Fixture Adapters

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (L26) .
Fig 1: View Of J-28467-501 & J 28467-B Cross Bar Installed On Engine
Courtesy of GENERAL MOTORS CORP.
2. Remove the left engine mount strut and the bracket from the upper radiator support. Refer to Engine Mount Strut Bracket Replacement - Upper Radiator Support .
3. Assemble the J-28467-501  (2) to the J 28467-B  cross bar (1).
4. Install the J 28467-B  (1) and the J-28467-501  (2) to the fender rails.
Fig 2: Installing J 36462-A To Cross Bar
Courtesy of GENERAL MOTORS CORP.
5. Install the J 36462-A  (1) to the cross bar (2). See Special Tools .
Fig 3: Support Lift Hook & Cross Bar
Courtesy of GENERAL MOTORS CORP.
6. Install the support lift hook (2) to the cross bar (1).
7. Install the support hook (1) to the right engine lift hook (3).
Fig 4: Installing Support Hook To Left Engine Lift Hook
Courtesy of GENERAL MOTORS CORP.
8. Install the support hook (1) to the J 36462-A  (2). See Special Tools .
9. Install the support hook (1) to the left engine lift hook (3).
Fig 5: Releasing Pressure Off Of Engine Mounts
Courtesy of GENERAL MOTORS CORP.
10. Raise the engine to release the pressure off of the engine mounts.