Installation Procedure
WARNING: This page is about a different variant/trim than selected.
- Install the engine mount strut.
- Install the bolt and the nut to the left engine mount strut at the left engine mount strut bracket on the upper radiator support.
Tighten: Tighten the engine mount strut bolt to 48 N.m (35 lb ft).
- Install the bolt and the nut to the left engine mount strut at the left engine mount strut bracket on the engine.
Tighten: Tighten the engine mount strut nut to 48 N.m (35 lb ft).
NOTE:
Refer to Fastener Notice
.