Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
- Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
- Squeeze the tangs together on the AIR pump outlet hose clamp (3) at the pump until they lock, and reposition the clamp.
- Remove the AIR pump outlet hose nut (1).
- Squeeze the tangs together on the AIR pump outlet hose clamp (2) at the valve until they lock, and reposition the clamp.
- Remove the AIR pump outlet hose.