Removal Procedure
CAUTION:
When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
- Raise and support the rear compartment lid.
- Use a small flat-bladed tool to lift up the snap-ring retainer at the bottom and the top of the rear compartment strut.
- Remove the rear compartment strut from the ball studs on the hinge.
- Remove rear compartment strut from the vehicle.
NOTE:
In order to avoid damaging the rear compartment strut, apply pressure at the strut end before removing or attaching the strut. Do not apply pressure to the mid-section of the rear compartment strut when removing or installing.