Removal Procedure
- Apply masking tape to the fender and door edges.
- Open and support the door.
- Clean the area around the hinge and mark the location with a grease pencil.
- If the upper hinge is broken, remove the upper hinge bolts from the door side in the specified sequence (1, 4).
- Remove the upper hinge bolts from the hinge pillar side in the specified sequence (1, 4, 5).
- If the lower hinge is broken, remove the lower hinge bolts from the door side in the specified sequence (3, 2).
- Remove the lower hinge bolts from the hinge pillar side in the specified sequence (3, 2).
- Remove the broken hinge from the door.
NOTE:
Refer to PAINT DAMAGE NOTICE
.
IMPORTANT:
Do not remove the door from the vehicle to replace the upper or lower hinges.