LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G8 Base >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E/5L50-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Output Shaft and Rear Internal Ring Gear Disassemble

Output Shaft and Rear Internal Ring Gear Disassemble

    Fig 1: Rear Internal Gear
    GM1960861Courtesy of GENERAL MOTORS CORP.
  1. Remove the snap ring (563).
  2. Remove the output shaft (562) from the rear internal gear (560).