LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G8 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transmission - 6L50/6L80/6L90 - Introduction (2 Of 2)) >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different variant/trim than selected.
Application Ref. No. Quantity Specification
Metric English
Case Extension to Case Assembly 34 6 50 N.m 37 lb. ft.
Control Solenoid Valve Assembly and Control Valve Lower Body Assembly to Control Valve Upper Body Assembly 310 6 8 N.m 71 lb. in
Control Solenoid Valve Assembly and Control Valve Lower Body Assembly to Control Valve Upper Body Assembly 309 10 8 N.m 71 lb. in
Control Solenoid Valve Heat Sink to Valve Body 312 2 8 N.m 71 lb. in
Control Valve Upper Body Assembly to Control Valve Lower Body Assembly 301 12 8 N.m 71 lb. in
Control (with Body and Valve) Valve Assembly to Case Assembly 22 6 8 N.m 71 lb. in
Fluid Pan Assembly to Case Assembly 30 18 9 N.m 80 lb. in
Fluid Pump Cover Assembly to Torque Converter Housing 231 13 11 N.m 97 lb. in
Input and Output Speed Sensor Assembly to Control Valve Upper Body Assembly 302 2 12 N.m 106 lb. in
Line Pressure Test Hole Plug to Torque Converter Housing 202 1 11 N.m 97 lb. in
Manual Shaft Detent Assembly to Valve Body 23 1 12 N.m 106 lb. in
Torque Converter Housing Assembly to Case Assembly 3 9 72 N.m 53 lb. ft.
* Reference number refers to the component callout number in Disassembled Views 
scientia non olet · About LEMON Manuals