LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G8 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays & Gages >> Repair Instructions >> Secondary Driver Information Display Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying SIC Display To I/P Upper Trim Panel Assembly Retaining Screws
    GM1957792Courtesy of GENERAL MOTORS CORP.
  1. Install the SIC display (2) to the I/P center trim panel assembly (3).
    2. NOTE: Refer to Fastener Notice .
  2. Install the SIC display to I/P upper trim panel assembly retaining screws (1).

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  3. Install the I/P center trim panel assembly. Refer to Instrument Panel Center Trim Panel Replacement .
scientia non olet · About LEMON Manuals