LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G5 Base, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Transmission Control Replacement >> Removal Procedure

Removal Procedure

  1. Remove the console trim plate. Refer to Console Front Trim Plate Replacement .
  2. If necessary, remove the shift control knob. Refer to Floor Shift Control Knob Replacement .
  3. Fig 1: View Of Shift Control
    GM851244Courtesy of GENERAL MOTORS CORP.
  4. Remove the shift cable retaining clip.
  5. Disconnect the shift cable from the shift control assembly.
  6. Fig 2: View Of Shift Control Mechanism
    GM1663966Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the shift lock solenoid harness connector (4).
  8. Remove the shift control nuts (2).
  9. Remove the shift control (3) from the vehicle.