LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G5 Base, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Input Internal Gear, Forward Clutch Hub Assemble >> Assembly Procedure

Assembly Procedure

    Fig 1: Disassembling Input Internal Gear & Forward Clutch Hub
    GM20252Courtesy of GENERAL MOTORS CORP.
  1. Assemble the forward clutch hub (577) onto the input internal gear (560) and retain it with the snap ring (578).
  2. Assemble the thrust washer (109) onto the forward clutch hub (577) with the thrust washer tabs toward the forward clutch hub (577). Retain the thrust washer with J 36850  or equivalent. See Special Tools .
scientia non olet · About LEMON Manuals