Radio Scan Tool Information (Uplevel Radio)

Radio Scan Tool Data Parameters

Parameter	System State	Expected Value	Description
Operating Conditions: Ignition ON, Radio OFF
Antenna Module	-	Enabled	The scan tool displays Enabled or Disabled. This is the state of the antenna module.
Auto Volume Control	-	Off	The scan tool displays On or Off. This is the state of the automatic volume control.
Band Status	-	Varies	The scan tool displays FM1, FM2, AM, XM1 or XM2. This is the current band status.
Battery Voltage Signal	-	Varies	This displays Volts. This is the current battery voltage signal.
Cassette Deck H.W. Level	-	Varies	This displays a numeric value.
Cassette Deck H.W. Level	-	Varies	This displays a numeric value.
Cassette Inserted	-	Varies	The scan tool displays Yes or No. Yes is displayed if a cassette is in the radio.
Cassette Tape Side	-	Varies	The scan tool displays Top or Bottom. This is the current side the cassette tape is playing.
CD Changer H.W. Level	-	Varies	This displays a numeric value.
CD Changer S.W. Level	-	Varies	This displays a numeric value.
CD Inserted	-	Varies	The scan tool displays Yes or No. Yes is displayed if a CD is inserted.
CD Selected - ICDX	-	Varies	The scan tool displays Disc 1-6 or None.
DRR	-	Present	The scan tool displays Present or Not Present. This is the status of the digital radio receiver (DRR).
ICDX	-	Varies	The scan tool displays Present or Not Present.
Ign. Cycles Since last DTC	-	Varies	This displays a numeric value. This is the number of ignition cycles since the last DTC was set.
Metal Tape Cassette	-	Varies	The scan tool displays Yes or No. Yes is displayed if a metal tape cassette is inside the radio.
Personalization Status	-	Varies	The scan tool displays Driver 1, Driver 2 or Unknown. This is the current personalization state.
Phone Signal	-	Present	The scan tool displays Present or Not Present. This is the state of the phone signal.
Preset Status	-	Varies	The scan tool displays Preset 1-6 or Not A Preset.
Radio Signal Strength	-	Varies	This displays dB. This is the current radio signal strength measured in decibels.
RSE	-	Varies	The scan tool displays Present or Not Present. Present is displayed if rear seat entertainment (RSE) is available.
Source Status	-	Off	The scan tool displays Off, Tuner, Cassette, CD, ICDX, DVD or DRR Tuner. This is the current radio source state.
Theft Armed	-	Learned VIN	The scan tool displays Learned VIN or No VIN. Learned VIN is displayed if the radio has the VIN stored in memory.
Theft Lock Status	-	Inactive	The scan tool displays Active or Inactive. This is the current state of the theft lock.
Total Cassette Hours	-	Varies	This displays Hrs. This is the total cassette hours.
Total CD Hours	-	Varies	This displays Hrs. This is the total CD hours.
Total Radio Hours	-	Varies	This displays Hrs. This is the total radio hours.
Volume Control	-	Varies	This displays Counts. This is the current volume measured in counts.

Radio Scan Tool Output Controls

Output Control	Description
Antenna	This output control is used to command the antenna.
Left Front Speaker	Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers.
Left Rear Speaker	Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers.
Right Front Speaker	Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers.
Right Rear Speaker	Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers.
VIN Relearn	This output control is used to program the vehicle identification number (VIN) into the radio.