LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G5 Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Seal Replacement - Plenum to Hood >> Installation Procedure

Installation Procedure

    Fig 1: View Of Hood Rear Seal
    GM872488Courtesy of GENERAL MOTORS CORP.
  1. Position the hood rear seal to the vehicle.
  2. Push the hood rear seal onto the air inlet screen in order to fully seat the seal.
scientia non olet · About LEMON Manuals