Installation Procedure
- Position the rear compartment lid hinge (3) to the vehicle.
- Install the rear compartment hinge nuts (1) to the studs on the decklid.
Tighten: Tighten the nuts to 10 N.m (89 lb in).
- Install the rear compartment hinge bolts (2) to the hinge.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
- Adjust the rear compartment lid if necessary. Refer to Rear Compartment Lid Adjustment .
NOTE:
Refer to Fastener Notice
.