LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G5 Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Strut Replacement >> Removal Procedure

Removal Procedure

CAUTION: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
NOTE: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.
    Fig 1: View Of Hood Strut Rod
    GM1549905Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the hood.
  2. Release the hood assist rod upper and lower retainer using a small flat-bladed tool.
  3. Remove the hood assist rod (1) from the vehicle.
scientia non olet · About LEMON Manuals