Hood Adjustment

Fig 1: Adjusting Hood Fore/Aft & Cross-Vehicle

Courtesy of GENERAL MOTORS CORP.

Loosen the hinge to body bolts to adjust the hood fore and aft, and cross-vehicle. Position the hood as needed.
Loosen the hinge to hood bolts to adjust the hood up and down at the rear of the hood. Position as needed.

Fig 2: Locating Hood Latch & Hood Bumpers

Courtesy of GENERAL MOTORS CORP.

Adjust the hood latch and hood bumpers to adjust the hood up and down at the front of the hood.

NOTE: Refer to Fastener Notice .

Tighten the hinge and latch bolts.
Tighten:
- Tighten the hinge-to-hood bolts to 10 N.m (89 lb in).
- Tighten the hinge-to-body bolts to 10 N.m (89 lb in).
- Tighten the hood latch nuts to 10 N.m (89 lb in).