LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Liftgate Strut Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Lower End Of Assist Rods
    GM621881Courtesy of GENERAL MOTORS CORP.
  1. Position the assist rods to the liftgate.
  2. Install the upper end of the assist rods to the ball joint. Press in to place until fully seated.
    3. Fig 2: View Of Liftgate Struts (Rendezvous)
    GM621880Courtesy of GENERAL MOTORS CORP.
  3. Install the lower end of the assist rods to the ball joint. Press in to place until fully seated.
  4. Remove the support from the liftgate.
  5. Close the liftgate.
scientia non olet · About LEMON Manuals