LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Liftgate Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Liftgate Hinge And Bolts
    GM876238Courtesy of GENERAL MOTORS CORP.
  1. Position the liftgate hinges to the marked location points on the liftgate, with an assistant.
  2. NOTE: Refer to Fastener Notice .
  3. Install the bolts (1) to the liftgate hinges (2), with an assistant.

    Tighten:  Tighten the liftgate hinge bolts to 19.5 N.m (14 lb ft).

  4. Support the liftgate.
  5. Install the liftgate struts. Refer to Liftgate Strut Replacement .
  6. Fig 2: Rear Wiper Relay Components
    GM876255Courtesy of GENERAL MOTORS CORP.
  7. Install the rear wiper relay (1) with bracket (4), secure relay with screws (3).
  8. Install the liftgate harness. Refer to Liftgate Wiring Harness Replacement .
  9. Install the high mount stop lamp. Refer to High Mounted Stop Lamp Replacement .
  10. Install the liftgate window latch. Refer to Brake Dust Caution .
  11. Install the liftgate latch. Refer to Liftgate Latch Replacement .
  12. Install the license lamps. Refer to Rear License Lamp Replacement .
  13. Install the liftgate applique. Refer to Liftgate Applique Replacement .
  14. Install the liftgate window weatherstrip. Refer to Liftgate Applique Replacement .
  15. Install the liftgate window. Refer to Liftgate Window Replacement .
  16. Install the liftgate window struts. Refer to Liftgate Window Strut Replacement .
  17. Install the wiper motor assembly. Refer to Liftgate Wiper Motor Replacement .
  18. Install the roof and mid spoilers, if removed. Refer to Rear Spoiler Replacement (Mid) or Rear Spoiler Replacement (Roof) .
  19. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  20. Close liftgate.
  21. Install the rear wiper arm. Refer to Rear Window Wiper Arm Replacement .