LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Liftgate Hinge Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Liftgate Hinge Bolts
    GM733667Courtesy of GENERAL MOTORS CORP.
  1. Align the hinge with the marks made on the vehicle body.
    2. NOTE: Refer to Fastener Notice .
  2. Install the hinge retaining nuts.

    Tighten:  Tighten the liftgate hinge stud nuts to 19.5 N.m (14 lb ft).

  3. Install the headliner. Refer to Headlining Trim Panel Replacement .
  4. Install the liftgate. Refer to Liftgate Replacement .
scientia non olet · About LEMON Manuals