LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Loosen/Tighten Mounting Bolts
    GM239363Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the hood.
  2. Install protective covers over the front fenders (2) to prevent paint damage.
    3. Fig 2: Hood Components
    GM431894Courtesy of GENERAL MOTORS CORP.
  3. Remove the 2 plastic retainers (3) at the rear of the hood insulator (1).
  4. Fold back the hood insulator (1) in order to access the nozzles and supply hose.
    5. Fig 3: Windshield Washer Nozzles And Supply Hose
    GM245168Courtesy of GENERAL MOTORS CORP.
  5. Remove the windshield washer nozzles (2) and supply hose (1) from the hood (3).
    6. Fig 4: Loosen/Tighten Mounting Bolts
    GM239363Courtesy of GENERAL MOTORS CORP.
  6. Mark the position of the hood hinges on the hood to ease assembly.
  7. Remove the 2 mounting bolts which secure the hood (1) to each of the hood hinges (3).
  8. Remove the hood with the aid of a helper.
scientia non olet · About LEMON Manuals