LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Rear Seal Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Rear Hood Seal
    GM821323Courtesy of GENERAL MOTORS CORP.
  1. Install the 7 rear hood seal plastic retainers to the seal (1).
  2. Install the rear hood seal (1) to the air inlet grille panels.
  3. Lower the hood.
scientia non olet · About LEMON Manuals