LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Latch Release Cable Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Disconnecting Hood Primary Latch Release Cable Grommet
    GM240889Courtesy of GENERAL MOTORS CORP.
  1. Attach the mechanic's wire (1) to the hood primary latch release cable (2).
  2. Guide the hood primary latch release cable into the vehicle with mechanic's wire (1).
  3. Remove the mechanic's wire (1) from the hood primary latch release cable (2).
  4. Install the hood primary latch release cable (2) to the hood primary latch release cable handle.
    5. Fig 2: Hood Latch Release Cable Handle And Instrument Panel
    GM880762Courtesy of GENERAL MOTORS CORP.
  5. Install the hood primary latch release cable handle (1) to the lower instrument panel (2).
    6. Fig 3: Disconnecting Hood Primary Latch Release Cable Grommet
    GM240889Courtesy of GENERAL MOTORS CORP.
  6. Guide the cable (2) into position and remove the mechanic's wire (1).
    7. Fig 4: Hood Latch And Release Cable
    GM239165Courtesy of GENERAL MOTORS CORP.
  7. Install the hood primary latch release cable (1) to the hood secondary catch and primary latch (2).
  8. Install the hood secondary catch and primary latch. Refer to Hood Latch Replacement .
  9. Install the two left wheel house panel inner fasteners.
  10. Lower the hood.
scientia non olet · About LEMON Manuals