LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Insulator Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Hood Components
    GM431910Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the hood.
  2. Remove the following components from the hood (2):
    • The 8 plastic retainers
    • The hood insulator (1)
scientia non olet · About LEMON Manuals