LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Hold-Open Rod Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Hood Hold-Open Rod, Retaining Clip And Grommet
    GM869704Courtesy of GENERAL MOTORS CORP.
  1. Install the hold-open rod (1) to the grommet (2).
  2. Push in and rotate the rod (1) 90 degrees clockwise.
  3. Install the hold-open rod (1) into the retaining clip (3).
  4. Lower the hood.
scientia non olet · About LEMON Manuals