LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Hinge Replacement >> Removal Procedure

Removal Procedure

  1. Remove the hood. Refer to Hood Replacement .
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  3. Remove the left front fender, if necessary. Refer to Front Fender Replacement - Left Side .
  4. Remove the right front fender, if necessary. Refer to Front Fender Replacement - Right Side .
    5. Fig 1: Remove/Install Hood Hinge
    GM239365Courtesy of GENERAL MOTORS CORP.
  5. Mark the position of the hood hinges to ease assembly.
  6. Remove the hinge bolts from the hood.
  7. Remove the hood hinge (1).
scientia non olet · About LEMON Manuals