LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Fender Replacement - Left Side >> Removal Procedure

Removal Procedure

    Fig 1: Body Panel
    GM431898Courtesy of GENERAL MOTORS CORP.
    NOTE: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.
  1. Raise and support the hood.
  2. Remove the left fender flare. Refer to Front Fender Flare Replacement .
  3. Remove the left wheelhouse panel (1). Refer to Wheelhouse Panel Replacement .
  4. Remove the front fascia. Refer to Front Bumper Fascia Replacement .
  5. Remove the left rocker molding. Refer to Rocker Panel Molding Replacement (Accessory Molding) or Rocker Panel Molding Replacement (Production Molding) .
  6. Remove the left headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement .
  7. Remove left rear inner fender splash guard.
    8. Fig 2: Remove/Install Front Fender
    GM239358Courtesy of GENERAL MOTORS CORP.
  8. Remove the front fender (1) to rocker panel bolt.
    9. Fig 3: Front Fender Door Jam Bolts
    GM239359Courtesy of GENERAL MOTORS CORP.
  9. Remove the 2 front fender to door jamb (3) bolts.
    10. Fig 4: Top Front Fender bolts
    GM828397Courtesy of GENERAL MOTORS CORP.
  10. Remove the top 2 front fender bolts (1).
    11. Fig 5: Left Front Fender Bolt
    GM828404Courtesy of GENERAL MOTORS CORP.
  11. Remove the 1 bolt (2) from the front of the left front fender.
  12. Remove the left front fender (1) from the vehicle.
scientia non olet · About LEMON Manuals