LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front End Sheet Metal Support Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Air Temperature Sensor And Center Support Connector
    GM431893Courtesy of GENERAL MOTORS CORP.
  1. Remove the hood secondary catch and primary latch. Refer to Hood Latch Replacement .
  2. Remove the input air temperature sensor (2) connector from the center support (1).
  3. Remove the upper fascia plastic retainer from the top of the center support.
    4. Fig 2: Hood Latch Bolts
    GM239366Courtesy of GENERAL MOTORS CORP.
  4. Remove the following components from the vehicle:
    • The 2 bolts
    • The center support (2)
scientia non olet · About LEMON Manuals