Front Bumper Fascia Replacement (Torrent)

Fig 1: View Of Front Bumper Fascia Components (Torrent)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the front wheelhouse liners. Refer to Front Wheelhouse Liner Replacement .
1	Front Fascia Lower Retainer (Qty: 3)
2	Front Fascia Bolt (Qty: 2) Tighten: 3 N.m (25 lb in)
3	Front Fascia Upper Retainer (Qty: 3)
4	Front Fascia Assembly Tip: Disconnect the electrical connectors. If replacing the fascia assembly, transfer parts as necessary.