Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

The engine control module (ECM) detects that the difference between measured MAP and the MAP Performance Test 1 is greater than 20 kPa for greater than 0.5 second.
AND
The ECM detects that the difference between measured MAP and the MAP Performance Test 2 is greater than 20 kPa for greater than 0.5 second.
OR
The ECM detects that the difference between the measured MAF and the MAF Performance Test is greater than 15 g/s for greater than 0.5 second.
AND
The ECM detects that the difference between measured MAP and the MAP Performance Test 1 is greater than 20 kPa for greater than 0.5 second.
AND
The ECM detects that the difference between measured MAP and the MAP Performance Test 2 is greater than 20 kPa for greater than 0.5 second.