LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Solstice GXP, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls & Fuel - 2.4L - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission Hoses/Pipes Replacement - Chassis/Canister >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Fuel Feed Line Quick Connect Fittings
    GM1765714Courtesy of GENERAL MOTORS CORP.
  1. Install the EVAP canister purge line.
  2. Connect the EVAP canister purge line quick connect fitting (1) to the chassis. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Install the fuel tank. Refer to Fuel Tank Replacement .