Steering Column Trim Covers Replacement

Fig 1: Steering Column Trim Covers

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the knee bolster. Refer to Knee Bolster Replacement . Remove the knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement . Lower the steering as necessary to remove the trim covers. Refer to Steering Column Replacement .
1	Steering Column Upper Trim Cover Assembly
2	Steering Column Trim Cover Retainer
3	Steering Column Trim Cover Bolts/Screws (Qty: 2) Tighten: 2.5 N.m (22 lb in)
4	Cover Assembly, Steering Column Lower Trim
5	Bolt/Screw Steering Column Trim Cover Tighten: 2.5 N.m (22 lb in)
6	Steering Column Lower Trim Cover Assembly
7	Steering Column Lower Trim Cover Hole Plug