LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Grand Prix GXP >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Front Oil Seal Installation

Crankshaft Front Oil Seal Installation

WARNING: This page is about a different variant/trim than selected.
Tools Required

J 35354  Seal Installer. See Special Tools 

    Fig 1: Installing Crankshaft Front Oil Seal
    GM36662Courtesy of GENERAL MOTORS CORP.
  1. Coat the inside diameter of the crankshaft front oil seal with lubricant GM P/N 12345616 (Canadian P/N 993182) or the equivalent.
  2. Use J 35354  and a soft faced hammer to install the crankshaft front oil seal. See Special Tools .
  3. Remove J 35354  . See Special Tools .
scientia non olet · About LEMON Manuals