LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Grand Prix GXP >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Camshaft Bearing Installation

Camshaft Bearing Installation

WARNING: This page is about a different variant/trim than selected.
Tools Required

J 33049  Camshaft Bearing Service Set

    Fig 1: Identifying Camshaft Bearings
    GM683961Courtesy of GENERAL MOTORS CORP.
  1. Select the camshaft bearings.
    2. Fig 2: Camshaft Bearing Service Set
    GM622704Courtesy of GENERAL MOTORS CORP.
  2. Use the following procedure to install the camshaft bearings:
    1. Assemble J 33049  according to the manufacturer's instructions.
    2. Place the bearing on the tool.
      3. NOTE: Severe engine damage may result if the oil holes are not correctly aligned.
    3. Index the bearing oil holes with the engine block oil passages.
scientia non olet · About LEMON Manuals