LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Grand Prix GXP >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Balance Shaft Bearing and/or Bushing Removal

Balance Shaft Bearing and/or Bushing Removal

WARNING: This page is about a different variant/trim than selected.
Tools Required

J 36995  Balance Shaft Bearing Remover/Installer. See Special Tools 

    Fig 1: Removing Balance Shaft Bearing And/Or Bushing
    GM36706Courtesy of GENERAL MOTORS CORP.
  1. Use J 36995  to remove the balance shaft bearing. See Special Tools .
  2. Use J 36995  to remove the balance shaft bushing. See Special Tools . It may take a considerable amount of force to loosen the bushing from the block bore.
scientia non olet · About LEMON Manuals