LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Grand Prix GXP >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels & Closures >> Repair Instructions >> Rear Compartment Lid Wiring Harness Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Rear Compartment Electrical Connectors
    GM318868Courtesy of GENERAL MOTORS CORP.
  1. Position the wiring harness to the vehicle.
  2. Use mechanics wire to attached to the wiring harness and pull the wiring harness through the rear compartment lid.
  3. Connect the wiring harness connectors to the electrical components on the rear compartment lid.
  4. Connect the wiring harness to the body harness.
  5. Connect the wiring harness retainers to the rear compartment lid and rear compartment.
  6. Install the rear compartment lid trim cover. Refer to Rear Compartment Lid Inner Panel Trim Replacement .
  7. Close the rear compartment.
scientia non olet · About LEMON Manuals