Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Raise the rear compartment lid.
- Place the protective coverings over the adjacent body panels.
- Use a grease pencil to mark the hinge to the rear compartment lid for the location at installation.
- Disconnect all electrical connectors from the rear compartment lid harness.
- Remove the rubber height adjustment bumpers.
- Remove the rear compartment lid latch. Refer to Rear Compartment Lid Latch Replacement
.
- Remove the rear spoiler, if equipped. Refer to Rear Spoiler Replacement
.
Courtesy of GENERAL MOTORS CORP.
- Remove the nuts from the rear compartment lid hinges with an assistant.
- Remove the rear compartment lid with an assistant.