LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Grand Prix Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Repair Instructions >> Instrument Cluster Head Up Display Replacement >> Removal Procedure

Removal Procedure

  1. Pull the I/P accessory trim plate rearward slightly for access to the steering column filler. Refer to Instrument Panel Accessory Trim Plate Replacement .
  2. Remove the I/P steering column opening filler. Refer to Steering Column Opening Filler Replacement .
  3. Remove the I/P cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement .
  4. Remove the instrument cluster. Refer to Instrument Cluster Replacement .
  5. Remove the windshield pillar garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim.
    6. NOTE: Use the following method to disengage the Head Up Display (HUD) retainers. Do NOT pry the retainers with a flat-bladed tool or other similar device.
    1. Disengage the I/P upper trim panel retainers on the sides of the HUD.
    2. Disengage the retainer rearward of the HUD.

    Failure to follow this method could break the tab on the HUD.
  6. Remove the I/P upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement .
    7. Fig 1: View Of HUD Screw
    GM1198005Courtesy of GENERAL MOTORS CORP.
  7. Remove the HUD screw.
    8. Fig 2: View Of HUD Bolts
    GM1198037Courtesy of GENERAL MOTORS CORP.
  8. Remove the HUD bolts.
    9. Fig 3: View Of HUD Electrical Connector
    GM1200054Courtesy of GENERAL MOTORS CORP.
  9. Adjust the HUD for access. Disconnect the HUD electrical connector.
  10. Remove the HUD
scientia non olet · About LEMON Manuals