Rear Seat Belt Retractor Replacement (Sedan)

Rear Seat Belt Retractor Replacement (Sedan)

Removal Procedure

1. Remove the rear seat back assembly.
2. Remove the rear window trim panel.




3. Remove the rear seat belt anchor.
4. Remove the retractor fastener.
5. Remove the retractor from the vehicle.

Installation Procedure




1. Install the seat belt retractor to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the fastener to the seat belt retractor.

Tighten the fastener to 35 N.m (25 lb ft).

3. Install the seat belt anchor.

Tighten the fastener to 35 N.m (25 lb ft).

4. Install the rear window trim panel.
5. Install the rear seat back assembly.